After successfully installing the access controller by following the instructions described here, it is time to connect the SmartAccess Panel with Spaces App.
How to connect the SmartAccess Panel?
Tap on the SmartAccess panel to light it up and activate the device
On the voice prompt "Please add Bluetooth administrator", open your account on Spaces App
Tap the"≡" icon in the upper left corner, tap "+add devices", and select "SmartAccess"
It will connect automatically after a few seconds
Warning:
If it fails, please restart Spaces App, disable/ enable Bluetooth, and try the above process again. If it still doesn't connect after the restart, you need to do a hard reset and try again.
Good to know:
Switch the light status to on/off
✖️49✔️admin passcode✔️0/1✔️ (or 0); (1 = "On" and 0 = "0ff")
Please note that when the light is off, the PINs will light up when a PIN is entered for easier usability - this feature is available only for latest SmartAccess Panels
Beeping sound on/off
Open the Spaces App, go to your Smart Access Panel > click the three dots in the top right-hand corner > sound > turn the toggle on/off.
